DyCoolSink H and HL 冷却槽H和HL

■ 本產品为鍛造太空鋁加工中心精製而成，坚实牢固，国际通用型，已申請中國專利。

■ 本產品冷却槽H和HL DyCoolSink H and HL导热组织学平台使您的组织或标本采集和制备标准化。当放置在冰、干冰、液氮、水浴或其他温度源上时，模块可快速适应源温度。

■ 本產品當样品保持在均匀的温度下，同时牢固地放置在稳固的平台上。非常适合动物和人类样品制备、活检、免疫组织化学（IHC）和组织或细胞冷冻。

■ 所有產品都受過陽極氧化和防腐處理。可用溶劑，含水洗滌劑，醇類和酸/鹼殺病毒劑（例如衛可）清洗。在使用清洗溶液後，需用乾淨的水沖洗。避免在過高或過低PH溶液中長時間浸泡（超過一小時），可在高達250°C下，高溫高壓消毒。

■ 太空鋁材質

■ 東易鑫品牌中國製造

特性：

■ 在上面加上聚乙稀保護蓋可以保護冷却槽H和HL不受到刀片損傷。

■ 兩側有安全把手，可以在低溫時安全的移動。當把手移除時，恆溫平臺可以承受高溫高壓滅菌、超高溫滅菌、以使用漂白水或酒精等消毒。

 注意事項：在製冷或加熱時，金屬表面直接接觸皮膚會引起嚴重燒傷。皮膚切勿直接接觸冷凍或加熱的金屬表面。在處理乾冰、液氮或其他熱源上的模塊時，務必使用絕緣防護手套。當使用液氮時，請遵守所有實驗室安全程序。

DyCoolSink H and HL

■ The product is made by aluminum alloy. It’s strong and firm international generic type, which has applied for patents in China.

■ DyCoolSink H and HL thermo-conductive histology platforms standardize your tissue or specimen collection and preparation. Modules rapidly adapt to the source tempera-ture when placed on ice, dry ice, liquid nitrogen, water bath or other temperature sources. 

■ Samples stay at uniform temperature while resting securely on a solid, stable platform. Ideal for animal and human sample preparation, biopsies, immunohistochemistry (IHC) and tissue or cell freezing.

■ All thermo-conductive modules are anodized and corrosion resistant. They may be cleaned with solvents, aqueous detergents, alcohols and acid/base viricide (such as Virkon S) solutions. Rinse with clear water after using cleaning solutions. Avoid soaking for extended periods (more than one hour) in low or high pH solutions. The modules are autoclavable and can be heat sterilized up to 250˚C.

■ Material: Aluminum alloy

■ Dongyixin Brand,Made in China

Features:

■ The addition of a polyethylene plate could protect it from damage to the blade.

■ It can be moved safely by two handles. It can be sterilized by ultra-high temperature, bleach or alcohol disinfection when the handles are removed.

 CAUTION: Direct skin contact with metal surfaces at cryogenic temperatures or when heated can cause serious burns. Never touch frozen or heated metal surfaces with bare skin. Always use insulated protective gloves when handling modules in dry ice, liquid nitrogen or any heat source. Follow all standard laboratory safety procedures when using LN2.